UK’s Air Capital Charter Uses King Air to stay on Top From humble beginnings, European-based Air Capital Charter has grown to be the leading and longest running charter operator in southwest England. Over the years, the company has added other specialized services, along with three Super King Air 200s, which has made it the leader…
A Discussion of Billbacks on Core Charges In earlier years, a core charge for an exchange part was like a little insurance policy for the vendor to ensure they got a unit back in exchange for the one they sent out. It’s just like a trip to the auto parts store. When you buy a…
A rather popular optional break system that you will find installed in lots of King Airs is Brake Deice. This system is only offered on King Airs with dual main landing gear wheels, so you will never find it on a member of the 90-series, with the exception of the F90 group, since they, like their…
The union of Pratt & Whitney Canada’s revolutionary PT6 turboprop engine with a pressurized Beechcraft airframe proved an unbeatable combination that set a new standard for small, cabin-class business aircraft. As World War II drew to a close, the introduction of turbojet-powered military fighters did not escape the notice of Walter H. Beech. Speed was…
MT- Airplane Propeller Entwicklung GmbH has received the FAA STC #SA03525NY for the next generation five-blade scimitar composite propeller MTV-27-1-E-C-F-R(P)/CFR260-65b on the Beech King Air 300/350 series powered by Pratt & Whitney PT6A-60A engines. The installation is also EASA certified. MT- Airplane Propeller says the new five-blade MT-Propellers provide a performance improvement of approximately eight…
CenTex Aerospace announced that it has earned many required approvals for its Saddle Tank Conversion STC for more models of the King Air. The FAA approved a revised PMA adding the King Air 200 and 300 series aircraft to the original PMA for the King Air 90. The European Aviation Safety Agency (EASA) has granted…
BLR Aerospace Introduces BLR Aerospace recently introduced a new ultra-quiet, lightweight propeller system called Whisper Prop™. Designed to improve King Air comfort, performance and safety, the five-blade, carbon fiber propeller with natural composite core is manufactured by MT-Propeller of Atting, Germany. The Whisper Prop system is certified and available for installation on King Airs individually…
SAIB CE-1515: Empennage – Horizontal & Vertical Stabilizer Structure Issued: April 20, 2015 Compliance: It has been determined that the airworthiness concern is not an unsafe condition that would warrant Airworthiness Directive (AD) action under Title 14 of the Code of Federal Regulations (14 CFR) Part 39 at this time. This is information only. Recommendations…
Service Bulletin 11-4118: Placards and Markings – Inspection/Replacement of Aft Compartment Instruction Plate Issued: May 2015 Compliance – Mandatory: An Airworthiness Directive will be requested on the matter covered by this Service Bulletin. This Service Bulletin is Mandatory and must be accomplished prior to next flight after receipt. Effectivity: Airplanes Model C90GTi King Air, Serial…
Onshore Outsourcing relies on King Air B200 to bringing IT jobs back onshore The King Air, our King Air, is essential to revitalizing rural America,” said Shane Mayes, founder and CEO of Onshore Outsourcing. That might sound like a brazen statement but Onshore Outsourcing has the business model and results to back it up: “Our…