Page 32 - Volume 12 Number 6

Technically...
Beechcraft Service Letter #MTL-55-01
Date: May 2018
Stabilizers – Inspection of the Washer
Location in the Elevator Support Assembly
Effectivity: King Air Model B200GT, Serial Numbers BY-301 through BY-303; King Air Model B300, Serial Numbers FL-1106, FL-1107, FL-1110, FL- 1111, and FL-1113; and King Air Model B300C, Serial Number FM-72
Reason: The washers for the left and right elevator support assemblies may not be installed in the correct location.
Description: This service document provides parts and instructions to inspect the left and right elevator support assemblies to make sure the washer is installed on the inboard side of the support assembly.
Compliance – Recommended: This service document should be accomplished at a scheduled maintenance period or inspection.
A service document published by Textron Aviation may be recorded as completed in an aircraft log only when the following requirements are satisfied:
1) The mechanic must complete all of the instructions in the service document, including the intent therein.
2) The mechanic must correctly use and install all applicable parts supplied with the service document kit. Only with written authorization from Textron Aviation can substitute parts or rebuilt parts be used to replace new parts.
RECENT SERVICE BULLETINS,
ADVISORY DIRECTIVES
AND SAFETY COMMUNICATIONS
30 • KING AIR MAGAZINE JUNE 2018